X-Mooring HS Plus-Cover

Always at the top. Buoyant thanks to high-grade fibre mix in abrasion resistant cover, ultimate strength with heat-set Dyneema® cores.

X-Mooring HS Plus-Cover

Breaking Loads and Weights

Elongation at 10% of break load 30.00 %
Ø [mm] kg/100 m

Bl. real [kN]*

Bl. linear [kN]**

Break length [km]***
44 92 1 226 1 362 136
52 126 1 673 1 859 135
62 161 2 185 2 428 138
70 234 3 374 3 749 147
76 289 3 915 4 350 138
82 341 4 470 4 967 134
88 389 5 393 5 992 141
94 416 5 876 6 529 144
100 491 6 669 7 410 139
106 537 7 527 8 363 143
114 613 8 328 9 253 139
120 704 9 085 10 094 132
128 788 9 878 10 976 128
134 945 11 897 13 219 128
140 1 069 13 915 15 461 133
146 1 184 14 925 16 583 129
156 1 364 15 862 17 624 119
162 1 433 16 799 18 666 120
168 1 634 18 746 20 829 117
176 1 720 19 683 21 870 117
182 1 832 20 621 22 912 115
192 1 996 22 495 24 994 115
200 2 162 23 360 25 956 110

*   Spliced break load
**  Break load in accordance with DIN EN ISO 2307
*** Break length in spliced condition

  • Referring to ISO 10325
  • Seven parallel cores made of heat-set 12-strand Dyneema® SK78 braids
  • Robust, yet light cover braid material made of Gleistein Plus yarns (polyolefin / polyester mix) with Geogard Marine Finish
  • Built-in torsion marker through lengthwise 50/50 colour pattern
  • Minimal elongation
  • Ultimate strength
  • Good abrasion resistance
  • Buoyant
  • Very good UV resistance

Load / Elongation curve

% of Bl.
% Elongation