GeoSquare Polyamide

The unbeatable heavyweight. High elongation, high tenacity and easy to splice.

GeoSquare Polyamide

Breaking Loads and Weights

Elongation at 10% of break load 720.00 %
Ø [mm] kg/100 m

Bl. real [kN]*

Bl. linear [kN]**

Break length [km]***
12 8 38 42 48
14 12 48 53 41
16 15 59 66 40
18 20 68 76 35
20 24 84 93 36
22 29 105 117 37
24 35 124 138 36
26 41 145 161 36
28 48 168 187 36
30 55 190 211 35
32 63 215 239 35
36 80 275 306 35
40 98 330 367 34
44 119 400 444 34
48 142 475 528 34
52 167 555 617 34
56 193 638 709 34
60 222 730 811 34
64 253 830 922 33
68 286 937 1 041 33
72 320 1 035 1 150 33
80 395 1 276 1 418 33
88 478 1 540 1 711 33
96 569 1 830 2 033 33
104 667 2 130 2 367 33
112 774 2 455 2 728 32
120 888 2 794 3 104 32
128 1 010 3 160 3 511 32
136 1 140 3 534 3 927 32
144 1 280 3 940 4 378 31

*   Spliced break load
**  Break load in accordance with DIN EN ISO 2307
*** Break length in spliced condition

  • Similar to ISO 1140
  • 8-strand square plait made of polyamide continuous filament
  • Deliverable thermo-stabilised to 40mm Ø, stabilisation available up to 64mm Ø
  • Available with Geogard Marine Finish on request, for improved abrasion resistance, higher tenacity and minimisation of hardening through weathering
  • High abrasion resistance and break load
  • Good UV resistance and high elongation
  • Does not float
  • Typical construction for stretchers

Load / Elongation curve

% of Bl.
% Elongation