GeoSafe Polyamid(e)

These braided safety lines are torque-free with a uniform, round cross-section, feature precisely defined stretch characteristics and boast high strength.

GeoSafe Polyamid(e)

Breaking Loads and Weights

Ø [mm] 9 10 11 12
Core Cover Slack [mm] 0 0 7 5
Elongation [%] 4.9 4.7 3.1 3
Sheat´s mass [%] 60.1 51.5 54 56
Core´s mass [%] 39.9 48.5 46 44
Shrinkage [%] 4.8 5.2 4.5 5.3
Breaking Strength linear [kN] 20 25.4 34.5 35.6
kg [100m] 5.4 6.4 7.6 9.5

*   Spliced break load
**  Break load in accordance with DIN EN ISO 2307

GeoSafe GeoTwin (DIN EN 1891)

Double-braided safety lines from Gleistein are torque-free, boast high strength and feature no measurable core to cover slack. This product admirably demonstrates our ability to deliver ropes perfectly matched to requirements of any type of installation. GeoSafe GeoTwin ropes comply with all DIN EN 354 criteria.

  • Double braid construction, uniform load distribution
  • Polyamide core, 12 or 16 plait
  • Polyamide cover, 32 plait
  • Thermostabilised on request
  • Standard: DIN EN 1891, Form A and B
  • 9 mm and 10 mm ø fulfil the requirements for Form B. Form A with free ends.
  • 11 mm and 12 mm ø fulfil the requirements for Form A and B without restrictions
  • Most common application of 9 mm and 10 mm for rappelling and rescue systems, 11 mm and 12 mm for fasteners and lanyards
  • Especially resistant against abrasion, highly dimensionally stable cover
  • Further diameters available on request
  • CE certified
  • All components of a PSE (Personal Safety Equipment) system must be attuned to each other, approved by an accredited institute and be CE certified. PSE systems not carrying the CE mark cannot be used.
  • Accredited testing station: CE 0158