geolift 1 

The measure of all slings

precise • light • cost-cutting

  

Technical data: Slings
WLL10t15t20t25t30t
General
Rope Ø [mm] 20 26 32 36 38
Splice on the free length
Min. length [m] 2,00 2,36 2,72   2.96  3,08 
Max. bearing surface width  [mm] 35 36  43  50 53 
Attachment point  [mm] 40 52  64  72 76
Weight [kg] 1,6 3,0  4,9   6,3 8,4
Splice in bending area
Min. length [m] 1,00 1,18  1,36  1,48 1,54
Max. bearing surface width  [mm] 46 56 67 79 83
Attachment point  [mm] 60 78 96 108 114
Weight [kg] 0,8 1,6 2,6 3,3 4,4

 

WLL40t50t60t80t100t
General
Rope Ø [mm] 44 52 56 76 88
Splice on the free length
Min. length [m] 3,64 4,12 4,36   5,56  6,28 
Max. bearing surface width  [mm] 58 67  67  96 110 
Attachment point  [mm] 88 104  112  152 176
Weight [kg] 11,5 13,1  13,9   18,1 20,7
Splice in bending area
Min. length [m] 1,82 2,06  2,68  5,56 6,28
Max. bearing surface width  [mm] 89 103 110 146 168
Attachment point  [mm] 132 156 168 228 264
Weight [kg] 6,1 6,9 8,4 18,1 20,7

 

Application benefits

  • Ultra-light: Weight only approx. one seventh of lifting tackle made of wire rope – despite an every higher safety factor
  • Extremely easy handling: Minimum effort required and usually without the need for additional aids
  • Minimal contact surfaces: The dimensionally stable textile fibre rope enables secure fastening on economically dimensioned attachment points 
  • Precision beyond the norms: Manufactured to the optimal length, minimal elongation (max. 1.8% in working load area)
  • Maximum safety: Minimal risk of injury or damage, 7x safety factor for WLL, condition and discard state externally identifiable 

 

Cost benefits

  • Individually exchangeable: Lowest length tolerances and constant characteristics throughout service life enabling replacement of individual slings
  • Reduced deployment of personnel: Child’s play to manoeuvre, affix and remove; reduced likelihood of absenteeism due to injuries or long-term impairments
  • Shorter set-up time, streamlined process: Fast and easy to install and remove general without further aids 
  • Long service life: Lowest sensitivity to climatic conditions, high abrasion resistance, targeted application of protective elements
  • Save on additional fittings: Additional shackles or adapters for securing and non-destructive connection are not required in most instances 

 

Examples

  • Automobile manufacturers cut overall procurement costs due to 7x longer service life: 22,000 lifting cycles compared with 3,200 cycles using wire rope slings 
    (See more in the Video)
  • Wind energy plant manufacturers save 8% of costs in the process chain ex works to installation  
    (Read more in the PDF)

 

Technical specifications

  • 10t – 400t loads (WLL) at 7x safety factor
  • Custom-made with WLL of more than 1,000t
  • Length incl. eye from 1.0m
  • Very high length precision / manufacturing tolerance (+/– 15mm to +/– 40mm at load capacities of 15t to 100t)
  • Small diameter, big loads (from 20mm)
  • Excellent protection against abrasion and the elements
  • Thermally stable to 70° C
  • Improved breaking load in frost (t0 –60° C)
  • Certified in accordance with DIN EN 1492-4, LA3 certification from DNV GL, GS label 

 

geolift-productive-reihe.jpg