X-Mooring HS Plus-Cover

Always at the top. Buoyant thanks to high-grade fibre mix in abrasion resistant cover, ultimate strength with heat-set Dyneema® cores.

X-Mooring HS Plus-Cover

Breaking Loads and Weights

PDF Add to wishlist

Elongation at 10% of break load 30.00 %
Ø [mm] kg/100 m

Bl. real [kN]*

Bl. linear [kN]**

 Break length [km]***
44 92 1226 1362 136
52 126 1673 1859 135
62 161 2185 2428 138
70 234 3374 3749 147
76 289 3915 4350 138
82 341 4470 4967 134
88 389 5393 5992 141
94 416 5876 6529 144
100 491 6669 7410 139
106 537 7527 8363 143
114 613 8328 9253 139
120 704 9085 10094 132
128 788 9878 10976 128
134 945 11897 13219 128
140 1069 13915 15461 133
146 1184 14925 16583 129
156 1364 15862 17624 119
162 1433 16799 18666 120
168 1634 18746 20829 117
176 1720 19683 21870 117
182 1832 20621 22912 115
192 1996 22495 24994 115
200 2162 23360 25956 110

*   Spliced break load
**  Break load in accordance with DIN EN ISO 2307
*** Break length in spliced condition

  • Referring to ISO 10325
  • Seven parallel cores made of heat-set 12-strand Dyneema® SK78 braids
  • Robust, yet light cover braid material made of Gleistein Plus yarns (polyolefin / polyester mix) with Geogard Marine Finish
  • Built-in torsion marker through lengthwise 50/50 colour pattern
  • Minimal elongation
  • Ultimate strength
  • Good abrasion resistance
  • Buoyant
  • Very good UV resistance

Load / Elongation curve

% of Bl.
% Elongation